Table of Contents
WG9525950539 fitment begins with a clear decision: Confirm the identity and configuration of a replacement before placing an order. This guide uses Leiying's catalogue entry for Intermediate Wheel Arch Bracket, reference WG9525950539, and turns the listed information into questions a buyer, warehouse team or workshop can use. The intended result is a documented match between the vehicle, part number, mounting interfaces and supplied assembly.
A damaged mudguard support must be replaced without confusing axle position, side or associated lamp hardware. The following WG9525950539 fitment workflow keeps the item-specific catalogue facts visible while distinguishing them from measurements, supplier confirmations and workshop judgements that still need to be obtained.

Catalogue reference for WG9525950539 fitment
| Reference field | Retrieved catalogue information |
|---|---|
| Reference code | WG9525950539 |
| Listed component | Intermediate Wheel Arch Bracket |
| Catalogue category | Fender Brackets |
| Application wording | Designed specifically for Sinotruk Haohan N7G/N5G and Howo MAX 6×4 dual-drive tractor units. |
| Installation location | Located in the middle of the chassis frame, between the dual drive wheels; secures the intermediate wheel arch and mudguard assembly, connects the front and rear wheel arches, and serves as the primary central support for the complete wheel arch system. |
| Material wording | Welded assembly made of thick-walled round tubing; features a black electrophoretic anti-rust coating and high load-bearing capacity; a chassis component prone to wear. |
Use the Intermediate Wheel Arch Bracket product entry as the catalogue source for WG9525950539 fitment. The table reproduces supplier listing information; it does not establish a vehicle-specific approval or an engineering limit. Request missing details against the actual configuration.
Working interfaces for WG9525950539 fitment
Choose the frame mounting face as the datum and record the support offset, hole centers and panel attachment orientation. Include the axle position in each photograph. A two-hole description narrows one feature but does not establish handedness, offset or vehicle compatibility. Some rear supports also carry lamp mounting points; show these features when present and ask whether the delivered revision includes them.
For WG9525950539 fitment, document these interfaces: frame rail mounting face, fender and mudflap attachments, axle and tyre clearance, tail-lamp or ancillary mounting points where fitted. Keep the working references connected to the actual item and the decision being made.
Document what is supplied for WG9525950539 fitment
Use a marked photograph or item list to define the supply boundary. The product name may describe an assembly even when the offer covers only one bracket, while an image may show hardware that is not included. Identify the bare component, bushes, plates, retainers and fasteners separately where relevant. Ask the workshop which adjoining items it needs for the repair. This prevents a correct main part from arriving without the small components required to complete the job.
The requested reference for WG9525950539 fitment is WG9525950539, listed as Intermediate Wheel Arch Bracket. Preserve that complete identity in the decision record.
Close the identification record
Finish the fitment record with the accepted code, vehicle configuration, mounting location and reference images. List unresolved questions rather than hiding them in an informal conversation. The buyer, supplier and workshop should work from the same confirmed reference. Retain the record with the order so a repeat purchase can use the accepted configuration. Recheck it when the vehicle, supplier or delivered revision changes; a previous successful order does not automatically validate every future variant.
For WG9525950539 fitment, the catalogue application wording is "Designed specifically for Sinotruk Haohan N7G/N5G and Howo MAX 6×4 dual-drive tractor units.". Check it against the actual vehicle before closing the item record.

Check the cab and chassis as separate references
A cab-related component can be described against a truck model even when its working interface belongs to a particular cab assembly. Record both references where available. If a cab or front-end assembly has been replaced, the current installation may need more detail than the original vehicle name supplies. Send the installed mounting photographs and ask which reference controls the offered part. Keep a confirmed cab application separate from an assumed whole-vehicle interchange.
The stated location for WG9525950539 fitment is "Located in the middle of the chassis frame, between the dual drive wheels; secures the intermediate wheel arch and mudguard assembly, connects the front and rear wheel arches, and serves as the primary central support for the complete wheel arch system.". Show the actual installed interface when confirming this position.
Treat optional attachment points explicitly
A mounting tab for a lamp, panel or ancillary item can distinguish an otherwise similar component. Identify which optional features the vehicle actually uses and ask whether they are present on the offered revision. Do not assume that an unused hole makes two parts interchangeable. The working faces and main attachments still require confirmation. List optional features separately so they cannot disappear from the discussion when the buyer simplifies the description.
For WG9525950539 fitment, the listed material is "Welded assembly made of thick-walled round tubing; features a black electrophoretic anti-rust coating and high load-bearing capacity; a chassis component prone to wear.". Any more precise material requirement remains a separate supplier question.
A component-specific matching example
Consider an inquiry that begins with the description "fender or mudguard bracket" and a loose component photograph. The catalogue contains WG9525950539 (Intermediate Wheel Arch Bracket) and WG9725939320 (Rear Left Fender Bracket). The other entry lists its application as Sinotruk Howo T7H, T5G, and Sitrak C7H (older 6×4 tractor models). Keep the two applications separate until a substitution is specifically confirmed. The recorded position for the requested item is Located in the middle of the chassis frame, between the dual drive wheels; secures the intermediate wheel arch and mudguard assembly, connects the front and rear wheel arches, and serves as the primary central support for the complete wheel arch system.; the comparison entry states Rear section of the left chassis longitudinal beam, behind the drive wheels; secures the rear fender and mud flap; some versions feature an integrated mounting bracket for the tail light.. In WG9525950539 fitment, these are identification clues for a supplier question, not proof of interchangeability. Ask the supplier to mark the offered item on the reference photograph and return the full confirmed code.
Distinguish the bare welded bracket from an assembly containing the fender, mudflap, lamp support or fasteners. A product photograph with several features does not guarantee that all ancillary items are supplied. Ask the supplier to identify the exact panel interface and whether optional lamp mounting points are part of the ordered revision.
Compare catalogue references before a substitution
| Part code | Component | Application wording | Position wording | Purchasing decision |
|---|---|---|---|---|
| WG9525950539 | Intermediate Wheel Arch Bracket | Designed specifically for Sinotruk Haohan N7G/N5G and Howo MAX 6×4 dual-drive tractor units. | Located in the middle of the chassis frame, between the dual drive wheels; secures the intermediate wheel arch and mudguard assembly, connects the front and rear wheel arches, and serves as the primary central support for the complete wheel arch system. | Requested reference; verify exact vehicle and scope |
| WG9725939320 | Rear Left Fender Bracket | Sinotruk Howo T7H, T5G, and Sitrak C7H (older 6×4 tractor models) | Rear section of the left chassis longitudinal beam, behind the drive wheels; secures the rear fender and mud flap; some versions feature an integrated mounting bracket for the tail light. | Separate catalogue entry; interchangeability not established |
| DZ95189957020 | Rear Drive-Axle Fender Bracket (Right Side) | Delong F3000 and earlier-model M3000 tractor trucks | Rear section of the right frame rail, behind the drive axle; secures the rear fender and mud flap; features a tubular bracket structure | Separate catalogue entry; interchangeability not established |
In WG9525950539 fitment, the comparison provides a structured supplier question rather than a substitute list. Similar names and nearby codes can describe different working interfaces. Keep a proposed alternative under its own identity until the applicable vehicle configuration and installation requirements have been confirmed.
Define the measuring references for WG9525950539 fitment
Choose reference faces that another person can locate consistently. Mark them on a sketch before recording hole positions or offsets. Keep the unit of measurement explicit and avoid mixing overall dimensions with working dimensions. If two people measure from opposite faces, their results can disagree even when neither measurement is careless. A repeatable reference system makes that difference visible and helps the supplier answer the actual geometry question.
Use the frame rail mounting face as an item-specific discussion point for WG9525950539 fitment; document its relationship to the vehicle mounting reference.
Use samples without copying damage
A physical sample can communicate shape and assembly relationships, but a removed component may be bent, worn or repaired. Identify these areas before treating the sample as a design reference. Combine it with vehicle documentation and the intended working interfaces. Agree which features the supplier may reproduce and which require a drawing or technical clarification. Preserve the sample identity so its condition cannot be confused with an approved new part.
For WG9525950539 fitment, agree the supply scope of this fender or mudguard bracket: bare component, associated supports and any included hardware.
Link packing to receiving checks
The packing specification and receiving checklist should refer to the same vulnerable features. If a projecting mount must be protected, receiving staff should know where to inspect it. Keep packing photographs with the delivery record when requested. This connection helps distinguish a manufacturing difference from transit damage and gives the supplier useful evidence for improving future shipments.
Compare the visible working features of Intermediate Wheel Arch Bracket with the accepted reference during WG9525950539 fitment. Resolve any image or delivered-item discrepancy.
Manage a proposed alternative
Ask the supplier to identify the proposed alternative by its own code and application. Compare working interfaces, material description and supplied scope with the original request. Record any limitations and the technical approval required. Do not relabel an alternative with the original number merely to simplify the order. Clear identification keeps the workshop informed and preserves the basis for future replenishment.
Close WG9525950539 fitment only when the code WG9525950539, confirmed configuration and responsible decision are recorded together.

Request the confirmed part and supply scope
For WG9525950539 fitment, send Leiying the complete code WG9525950539, vehicle details, installed-location photographs and required quantity. Ask the team to confirm the offered component, included accessories and current supply conditions. Use fleet maintenance for the relevant service context, or browse Fender Brackets catalogue references.
For general background on documented joints and fasteners, see the NASA Fastener Design Manual. Use vehicle-specific instructions for the actual truck assembly.
Frequently asked questions
What information is needed for WG9525950539 fitment?
WG9525950539 fitment needs the complete code WG9525950539, the exact vehicle configuration, the installed location and clear photographs of the working interfaces. Add drawings or measured references when a feature is uncertain.
Can WG9525950539 fitment rely on a catalogue category alone?
No. For WG9525950539 fitment, use the item-specific record for Intermediate Wheel Arch Bracket. The catalogue category groups products for browsing; it does not establish material, handedness or interchangeability.
Which specification controls WG9525950539 fitment?
WG9525950539 fitment should use the accepted product configuration and the applicable vehicle or approved engineering documentation. The retrieved catalogue does not supply a universal torque, dimensional tolerance or service limit.
Does a two-hole fender bracket fit either side of the truck? How does this affect WG9525950539 fitment?
Not automatically. Two holes describe only one feature. Confirm side, mounting-face offset, axle location, vehicle configuration and the exact part number. Record that confirmation as part of WG9525950539 fitment before the purchasing or workshop decision is closed.
Can Leiying help with WG9525950539 fitment?
Leiying describes part-number, photograph, drawing and sample matching services. Send the references for WG9525950539 fitment and ask the team to confirm the offered item, included components and current supply conditions before ordering.


