বিষয়বস্তুর সারণী
WG9525950539 fitment begins with a clear decision: Confirm the identity and configuration of a replacement before placing an order. This guide uses Leiying's catalogue entry for Intermediate Wheel Arch Bracket, reference WG9525950539, and turns the listed information into questions a buyer, warehouse team or workshop can use. The intended result is a documented match between the vehicle, part number, mounting interfaces and supplied assembly.
A damaged mudguard support must be replaced without confusing axle position, side or associated lamp hardware. The following WG9525950539 fitment workflow keeps the item-specific catalogue facts visible while distinguishing them from measurements, supplier confirmations and workshop judgements that still need to be obtained.

Catalogue reference for WG9525950539 fitment
| রেফারেন্স ক্ষেত্র | সংগৃহীত ক্যাটালগ তথ্য |
|---|---|
| রেফারেন্স কোড | WG9525950539 |
| তালিকাভুক্ত উপাদান | মধ্যবর্তী চাকা খিলান বন্ধনী |
| ক্যাটালগ বিভাগ | ফেন্ডার বন্ধনী |
| অ্যাপ্লিকেশন শব্দচয়ন | Sinotruk Haohan N7G/N5G এবং Howo MAX 6×4 ডুয়াল-ড্রাইভ ট্রাক্টর ইউনিটের জন্য বিশেষভাবে ডিজাইন করা হয়েছে।. |
| ইনস্টলেশন অবস্থান | চ্যাসিস ফ্রেমের মাঝখানে, ডুয়াল ড্রাইভ চাকার মধ্যে অবস্থিত; মধ্যবর্তী চাকা খিলান এবং মাডগার্ড সমাবেশ সুরক্ষিত করে, সামনে এবং পিছনের চাকার খিলানগুলিকে সংযুক্ত করে এবং সম্পূর্ণ চাকা খিলান ব্যবস্থার জন্য প্রাথমিক কেন্দ্রীয় সমর্থন হিসাবে কাজ করে।. |
| উপাদান শব্দ | পুরু-প্রাচীরযুক্ত বৃত্তাকার টিউবিং দিয়ে তৈরি ঢালাই সমাবেশ; একটি কালো ইলেক্ট্রোফোরেটিক অ্যান্টি-রাস্ট আবরণ এবং উচ্চ লোড বহন ক্ষমতা বৈশিষ্ট্যযুক্ত; একটি চ্যাসিস উপাদান পরিধান প্রবণ।. |
ব্যবহার করুন Intermediate Wheel Arch Bracket product entry as the catalogue source for WG9525950539 fitment. The table reproduces supplier listing information; it does not establish a vehicle-specific approval or an engineering limit. Request missing details against the actual configuration.
Working interfaces for WG9525950539 fitment
ডেটাম হিসাবে ফ্রেম মাউন্টিং ফেস চয়ন করুন এবং সমর্থন অফসেট, গর্ত কেন্দ্র এবং প্যানেল সংযুক্তি অভিযোজন রেকর্ড করুন। প্রতিটি ফটোগ্রাফে এক্সেল অবস্থান অন্তর্ভুক্ত করুন। একটি দুই-গর্ত বিবরণ একটি বৈশিষ্ট্য সংকীর্ণ করে কিন্তু হ্যান্ডেডনেস, অফসেট বা গাড়ির সামঞ্জস্য স্থাপন করে না। কিছু পিছনের সমর্থন বাতি মাউন্টিং পয়েন্ট বহন করে; উপস্থিত থাকাকালীন এই বৈশিষ্ট্যগুলি দেখান এবং বিতরণ করা সংশোধন সেগুলি অন্তর্ভুক্ত কিনা তা জিজ্ঞাসা করুন।.
For WG9525950539 fitment, document these interfaces: frame rail mounting face, fender and mudflap attachments, axle and tyre clearance, tail-lamp or ancillary mounting points where fitted. Keep the working references connected to the actual item and the decision being made.
Document what is supplied for WG9525950539 fitment
সরবরাহের সীমানা নির্ধারণ করতে একটি চিহ্নিত ফটোগ্রাফ বা আইটেম তালিকা ব্যবহার করুন। অফারটি শুধুমাত্র একটি বন্ধনী কভার করলেও পণ্যের নাম একটি সমাবেশকে বর্ণনা করতে পারে, যখন একটি চিত্র অন্তর্ভুক্ত নয় এমন হার্ডওয়্যার দেখাতে পারে। যেখানে প্রাসঙ্গিক সেখানে খালি উপাদান, ঝোপ, প্লেট, রিটেইনার এবং ফাস্টেনার আলাদাভাবে চিহ্নিত করুন। ওয়ার্কশপকে জিজ্ঞাসা করুন যে মেরামতের জন্য কোন সংলগ্ন আইটেমগুলি প্রয়োজন। এটি কাজটি সম্পূর্ণ করার জন্য প্রয়োজনীয় ছোট উপাদান ছাড়াই একটি সঠিক প্রধান অংশকে পৌঁছাতে বাধা দেয়।.
The requested reference for WG9525950539 fitment is WG9525950539, listed as Intermediate Wheel Arch Bracket. Preserve that complete identity in the decision record.
সনাক্তকরণ রেকর্ড বন্ধ করুন
গৃহীত কোড, গাড়ির কনফিগারেশন, মাউন্টিং অবস্থান এবং রেফারেন্স চিত্রগুলির সাথে ফিটমেন্ট রেকর্ডটি শেষ করুন। একটি অনানুষ্ঠানিক কথোপকথনে সেগুলি লুকানোর পরিবর্তে অমীমাংসিত প্রশ্নগুলি তালিকাভুক্ত করুন। ক্রেতা, সরবরাহকারী এবং কর্মশালার একই নিশ্চিত রেফারেন্স থেকে কাজ করা উচিত। অর্ডারের সাথে রেকর্ডটি ধরে রাখুন যাতে একটি পুনরাবৃত্তি ক্রয় গৃহীত কনফিগারেশন ব্যবহার করতে পারে। গাড়ি, সরবরাহকারী বা বিতরণ করা সংশোধন পরিবর্তন হলে এটি পুনরায় পরীক্ষা করুন; একটি পূর্ববর্তী সফল অর্ডার স্বয়ংক্রিয়ভাবে প্রতিটি ভবিষ্যত বৈকল্পিক যাচাই করে না।.
For WG9525950539 fitment, the catalogue application wording is "Designed specifically for Sinotruk Haohan N7G/N5G and Howo MAX 6×4 dual-drive tractor units.". Check it against the actual vehicle before closing the item record.

আলাদা রেফারেন্স হিসাবে ক্যাব এবং চেসিস পরীক্ষা করুন
একটি ক্যাব-সম্পর্কিত উপাদান একটি ট্রাক মডেলের বিরুদ্ধে বর্ণনা করা যেতে পারে এমনকি যখন এর কার্যকারী ইন্টারফেস একটি নির্দিষ্ট ক্যাব সমাবেশের অন্তর্গত হয়। যেখানে উপলব্ধ উভয় রেফারেন্স রেকর্ড করুন। যদি একটি ক্যাব বা ফ্রন্ট-এন্ড অ্যাসেম্বলি প্রতিস্থাপন করা হয়, তাহলে বর্তমান ইনস্টলেশনের মূল গাড়ির নাম সরবরাহের চেয়ে আরও বিশদ প্রয়োজন হতে পারে। ইনস্টল করা মাউন্টিং ফটোগ্রাফ পাঠান এবং জিজ্ঞাসা করুন কোন রেফারেন্স প্রস্তাবিত অংশ নিয়ন্ত্রণ করে। একটি নিশ্চিত ক্যাব অ্যাপ্লিকেশন একটি অনুমান সম্পূর্ণ যানবাহন বিনিময় থেকে আলাদা রাখুন।.
The stated location for WG9525950539 fitment is "Located in the middle of the chassis frame, between the dual drive wheels; secures the intermediate wheel arch and mudguard assembly, connects the front and rear wheel arches, and serves as the primary central support for the complete wheel arch system.". Show the actual installed interface when confirming this position.
ঐচ্ছিক সংযুক্তি পয়েন্টগুলি স্পষ্টভাবে আচরণ করুন
একটি বাতি, প্যানেল বা আনুষঙ্গিক আইটেমের জন্য একটি মাউন্টিং ট্যাব অন্যথায় অনুরূপ উপাদানকে আলাদা করতে পারে। গাড়িটি আসলে কোন ঐচ্ছিক বৈশিষ্ট্যগুলি ব্যবহার করে তা চিহ্নিত করুন এবং প্রস্তাবিত সংশোধনে উপস্থিত আছে কিনা তা জিজ্ঞাসা করুন। অনুমান করবেন না যে একটি অব্যবহৃত গর্ত দুটি অংশকে বিনিময়যোগ্য করে তোলে। কাজের মুখ এবং প্রধান সংযুক্তি এখনও নিশ্চিতকরণ প্রয়োজন। ঐচ্ছিক বৈশিষ্ট্যগুলি আলাদাভাবে তালিকাভুক্ত করুন যাতে ক্রেতা বর্ণনাটি সরল করলে আলোচনা থেকে অদৃশ্য হয়ে না যায়।.
For WG9525950539 fitment, the listed material is "Welded assembly made of thick-walled round tubing; features a black electrophoretic anti-rust coating and high load-bearing capacity; a chassis component prone to wear.". Any more precise material requirement remains a separate supplier question.
একটি উপাদান-নির্দিষ্ট মিল উদাহরণ
Consider an inquiry that begins with the description "fender or mudguard bracket" and a loose component photograph. The catalogue contains WG9525950539 (Intermediate Wheel Arch Bracket) and WG9725939320 (Rear Left Fender Bracket). The other entry lists its application as Sinotruk Howo T7H, T5G, and Sitrak C7H (older 6×4 tractor models). Keep the two applications separate until a substitution is specifically confirmed. The recorded position for the requested item is Located in the middle of the chassis frame, between the dual drive wheels; secures the intermediate wheel arch and mudguard assembly, connects the front and rear wheel arches, and serves as the primary central support for the complete wheel arch system.; the comparison entry states Rear section of the left chassis longitudinal beam, behind the drive wheels; secures the rear fender and mud flap; some versions feature an integrated mounting bracket for the tail light.. In WG9525950539 fitment, these are identification clues for a supplier question, not proof of interchangeability. Ask the supplier to mark the offered item on the reference photograph and return the full confirmed code.
ফেন্ডার, মাডফ্ল্যাপ, ল্যাম্প সাপোর্ট বা ফাস্টেনার ধারণকারী সমাবেশ থেকে বেয়ার ওয়েল্ডেড বন্ধনীকে আলাদা করুন। বিভিন্ন বৈশিষ্ট্য সহ একটি পণ্যের ফটোগ্রাফ গ্যারান্টি দেয় না যে সমস্ত আনুষঙ্গিক আইটেম সরবরাহ করা হয়েছে। সরবরাহকারীকে সঠিক প্যানেল ইন্টারফেস সনাক্ত করতে বলুন এবং ঐচ্ছিক ল্যাম্প মাউন্টিং পয়েন্টগুলি অর্ডারকৃত সংশোধনের অংশ কিনা।.
একটি প্রতিস্থাপনের আগে ক্যাটালগ রেফারেন্স তুলনা করুন
| অংশ কোড | উপাদান | অ্যাপ্লিকেশন শব্দচয়ন | অবস্থান শব্দ | ক্রয়ের সিদ্ধান্ত |
|---|---|---|---|---|
| WG9525950539 | মধ্যবর্তী চাকা খিলান বন্ধনী | Sinotruk Haohan N7G/N5G এবং Howo MAX 6×4 ডুয়াল-ড্রাইভ ট্রাক্টর ইউনিটের জন্য বিশেষভাবে ডিজাইন করা হয়েছে।. | চ্যাসিস ফ্রেমের মাঝখানে, ডুয়াল ড্রাইভ চাকার মধ্যে অবস্থিত; মধ্যবর্তী চাকা খিলান এবং মাডগার্ড সমাবেশ সুরক্ষিত করে, সামনে এবং পিছনের চাকার খিলানগুলিকে সংযুক্ত করে এবং সম্পূর্ণ চাকা খিলান ব্যবস্থার জন্য প্রাথমিক কেন্দ্রীয় সমর্থন হিসাবে কাজ করে।. | অনুরোধকৃত রেফারেন্স; সঠিক যানবাহন এবং সুযোগ যাচাই করুন |
| WG9725939320 | পিছনের বাম ফেন্ডার বন্ধনী | Sinotruk Howo T7H, T5G, এবং Sitrak C7H (পুরানো 6×4 ট্রাক্টর মডেল) | বাম চ্যাসিস অনুদৈর্ঘ্য মরীচির পিছনের অংশ, ড্রাইভ চাকার পিছনে; পিছনের ফেন্ডার এবং কাদা ফ্ল্যাপ সুরক্ষিত করে; কিছু সংস্করণে টেইল লাইটের জন্য একটি সমন্বিত মাউন্টিং বন্ধনী রয়েছে।. | পৃথক ক্যাটালগ এন্ট্রি; বিনিময়যোগ্যতা প্রতিষ্ঠিত হয়নি |
| DZ95189957020 | রিয়ার ড্রাইভ-অ্যাক্সেল ফেন্ডার বন্ধনী (ডান দিকে) | Delong F3000 এবং আগের মডেলের M3000 ট্রাক্টর ট্রাক | ডান ফ্রেম রেলের পিছনের অংশ, ড্রাইভ এক্সেলের পিছনে; পিছনের ফেন্ডার এবং কাদা ফ্ল্যাপ সুরক্ষিত করে; একটি নলাকার বন্ধনী গঠন বৈশিষ্ট্য | পৃথক ক্যাটালগ এন্ট্রি; বিনিময়যোগ্যতা প্রতিষ্ঠিত হয়নি |
In WG9525950539 fitment, the comparison provides a structured supplier question rather than a substitute list. Similar names and nearby codes can describe different working interfaces. Keep a proposed alternative under its own identity until the applicable vehicle configuration and installation requirements have been confirmed.
Define the measuring references for WG9525950539 fitment
রেফারেন্স মুখগুলি চয়ন করুন যা অন্য ব্যক্তি ধারাবাহিকভাবে সনাক্ত করতে পারে। হোল পজিশন বা অফসেট রেকর্ড করার আগে একটি স্কেচে তাদের চিহ্নিত করুন। পরিমাপের একককে সুস্পষ্ট রাখুন এবং কাজের মাত্রার সাথে সামগ্রিক মাত্রা মিশ্রিত করা এড়িয়ে চলুন। যদি দু'জন ব্যক্তি বিপরীত মুখ থেকে পরিমাপ করে, তবে তাদের ফলাফলগুলি দ্বিমত হতে পারে এমনকি যখন কোন পরিমাপই অসতর্ক নয়। একটি পুনরাবৃত্তিযোগ্য রেফারেন্স সিস্টেম সেই পার্থক্যটিকে দৃশ্যমান করে তোলে এবং সরবরাহকারীকে প্রকৃত জ্যামিতি প্রশ্নের উত্তর দিতে সহায়তা করে।.
Use the frame rail mounting face as an item-specific discussion point for WG9525950539 fitment; document its relationship to the vehicle mounting reference.
ক্ষতি অনুলিপি ছাড়া নমুনা ব্যবহার করুন
একটি শারীরিক নমুনা আকৃতি এবং সমাবেশ সম্পর্ক যোগাযোগ করতে পারে, কিন্তু একটি সরানো উপাদান বাঁকানো, পরা বা মেরামত করা যেতে পারে। নমুনাকে ডিজাইনের রেফারেন্স হিসাবে বিবেচনা করার আগে এই অঞ্চলগুলি চিহ্নিত করুন। গাড়ির ডকুমেন্টেশন এবং উদ্দেশ্যযুক্ত কাজের ইন্টারফেসের সাথে এটি একত্রিত করুন। সম্মত হন যে কোন বৈশিষ্ট্যগুলি সরবরাহকারী পুনরুত্পাদন করতে পারে এবং যার জন্য একটি অঙ্কন বা প্রযুক্তিগত স্পষ্টীকরণ প্রয়োজন। নমুনা পরিচয় সংরক্ষণ করুন যাতে এর অবস্থা একটি অনুমোদিত নতুন অংশের সাথে বিভ্রান্ত না হয়।.
For WG9525950539 fitment, agree the supply scope of this fender or mudguard bracket: bare component, associated supports and any included hardware.
চেক গ্রহণের জন্য প্যাকিং লিঙ্ক করুন
প্যাকিং স্পেসিফিকেশন এবং প্রাপ্তি চেকলিস্ট একই দুর্বল বৈশিষ্ট্য উল্লেখ করা উচিত। যদি একটি প্রজেক্টিং মাউন্ট সুরক্ষিত করা আবশ্যক, প্রাপ্ত কর্মীদের এটি কোথায় পরিদর্শন করতে হবে তা জানা উচিত। অনুরোধ করা হলে ডেলিভারি রেকর্ড সহ ছবি প্যাকিং রাখুন। এই সংযোগটি ট্রানজিট ক্ষতি থেকে একটি উত্পাদন পার্থক্যকে আলাদা করতে সাহায্য করে এবং সরবরাহকারীকে ভবিষ্যতের চালানের উন্নতির জন্য দরকারী প্রমাণ দেয়।.
Compare the visible working features of Intermediate Wheel Arch Bracket with the accepted reference during WG9525950539 fitment. Resolve any image or delivered-item discrepancy.
একটি প্রস্তাবিত বিকল্প পরিচালনা করুন
সরবরাহকারীকে তার নিজস্ব কোড এবং অ্যাপ্লিকেশন দ্বারা প্রস্তাবিত বিকল্প সনাক্ত করতে বলুন। মূল অনুরোধের সাথে কাজের ইন্টারফেস, উপাদানের বিবরণ এবং সরবরাহের সুযোগ তুলনা করুন। প্রয়োজনীয় কোনো সীমাবদ্ধতা এবং প্রযুক্তিগত অনুমোদন রেকর্ড করুন। অর্ডারটি সহজ করার জন্য শুধুমাত্র মূল নম্বরের সাথে একটি বিকল্প রিলেবেল করবেন না। পরিষ্কার শনাক্তকরণ কর্মশালাকে অবহিত রাখে এবং ভবিষ্যতে পুনরায় পূরণের ভিত্তি সংরক্ষণ করে।.
Close WG9525950539 fitment only when the code WG9525950539, confirmed configuration and responsible decision are recorded together.

নিশ্চিত অংশ এবং সরবরাহ সুযোগ অনুরোধ
For WG9525950539 fitment, send Leiying the complete code WG9525950539, vehicle details, installed-location photographs and required quantity. Ask the team to confirm the offered component, included accessories and current supply conditions. Use ফ্লিট রক্ষণাবেক্ষণ প্রাসঙ্গিক পরিষেবা প্রসঙ্গের জন্য, বা ব্রাউজ করুন ফেন্ডার বন্ধনী ক্যাটালগ রেফারেন্স.
নথিভুক্ত জয়েন্ট এবং ফাস্টেনার সাধারণ পটভূমির জন্য, দেখুন নাসা ফাস্টেনার ডিজাইন ম্যানুয়াল. । প্রকৃত ট্রাক সমাবেশের জন্য যানবাহন-নির্দিষ্ট নির্দেশাবলী ব্যবহার করুন।.
প্রায়শই জিজ্ঞাসিত প্রশ্নাবলী
What information is needed for WG9525950539 fitment?
WG9525950539 fitment needs the complete code WG9525950539, the exact vehicle configuration, the installed location and clear photographs of the working interfaces. Add drawings or measured references when a feature is uncertain.
Can WG9525950539 fitment rely on a catalogue category alone?
No. For WG9525950539 fitment, use the item-specific record for Intermediate Wheel Arch Bracket. The catalogue category groups products for browsing; it does not establish material, handedness or interchangeability.
Which specification controls WG9525950539 fitment?
WG9525950539 fitment should use the accepted product configuration and the applicable vehicle or approved engineering documentation. The retrieved catalogue does not supply a universal torque, dimensional tolerance or service limit.
Does a two-hole fender bracket fit either side of the truck? How does this affect WG9525950539 fitment?
Not automatically. Two holes describe only one feature. Confirm side, mounting-face offset, axle location, vehicle configuration and the exact part number. Record that confirmation as part of WG9525950539 fitment before the purchasing or workshop decision is closed.
Can Leiying help with WG9525950539 fitment?
Leiying describes part-number, photograph, drawing and sample matching services. Send the references for WG9525950539 fitment and ask the team to confirm the offered item, included components and current supply conditions before ordering.


