Mục lục
DZ1321430090 fitment begins with a clear decision: Confirm the identity and configuration of a replacement before placing an order. This guide uses Leiying's catalogue entry for Front Suspension Tilt Shaft Assembly, reference DZ1321430090, and turns the listed information into questions a buyer, warehouse team or workshop can use. The intended result is a documented match between the vehicle, part number, mounting interfaces and supplied assembly.
A replacement tilt shaft is needed, but the workshop has only an old assembly and an uncertain cab-series description. The following DZ1321430090 fitment workflow keeps the item-specific catalogue facts visible while distinguishing them from measurements, supplier confirmations and workshop judgements that still need to be obtained.

Catalogue reference for DZ1321430090 fitment
| Trường tham chiếu | Truy xuất thông tin danh mục |
|---|---|
| Mã tham chiếu | DZ1321430090 |
| Thành phần được liệt kê | Mặt trận treo nghiêng trục hội |
| Danh mục danh mục | Trục Lật Và Thanh Chống Khoan |
| Từ ngữ ứng dụng | Xe taxi Delong F3000, M3000 mới và X3000 |
| Vị trí lắp đặt | Cơ cấu treo trước ở phía trước cabin; đóng vai trò là trục xoay chính nối khung và cabin; đóng vai trò là điểm tựa nghiêng của cabin, hỗ trợ, hấp thụ sốc và ổn định ngang cho mặt trước của cabin. |
| Từ ngữ vật chất | Trục tròn có thành dày + lắp ráp cánh tay đòn bằng thép đúc; có ống lót cao su bên trong và lớp phủ chống gỉ điện di màu đen |
Sử dụng các Front Suspension Tilt Shaft Assembly product entry as the catalogue source for DZ1321430090 fitment. The table reproduces supplier listing information; it does not establish a vehicle-specific approval or an engineering limit. Request missing details against the actual configuration.
Working interfaces for DZ1321430090 fitment
Record overall width together with the distance between the actual mounting references. The outside length of a tube does not establish the working span between its arms. Capture arm angle, bush positions, end geometry and mounting-face orientation. For an integrated assembly, preserve the relationship between the shaft and arms in every photograph and measurement. A loose arm from another unit is not a reliable dimensional reference for the complete assembly.
For DZ1321430090 fitment, document these interfaces: shaft and pivot centerline, swing-arm mounting faces, bush seats and end locations, cab-to-frame attachment points. Keep the working references connected to the actual item and the decision being made.
Read the part number as a complete identifier for DZ1321430090 fitment
Sao chép mã phần đầy đủ, bao gồm tiền tố, hậu tố và dấu phân cách. một mã không đầy đủ có thể trỏ đến một mục khác nhau, trong khi một đúc tương tự-tìm kiếm có thể mang một cấu hình gia công khác nhau. yêu cầu nhà cung cấp trả lại số xác nhận bằng văn bản với báo giá.Nếu một thay thế hoặc thay thế mã được cung cấp, yêu cầu lý do cho sự thay đổi và cấu hình xe mà nó được áp dụng. giữ tham chiếu ban đầu và thay thế đề xuất riêng biệt cho đến khi phù hợp kỹ thuật đã được chấp nhận.
The requested reference for DZ1321430090 fitment is DZ1321430090, listed as Front Suspension Tilt Shaft Assembly. Preserve that complete identity in the decision record.
Giải quyết biến thể xe
Một mô hình gia đình là một điểm khởi đầu hữu ích, nhưng một trận đấu hoàn chỉnh có thể phụ thuộc vào thế hệ cab, cấu hình bội thu, bố trí trục và sửa đổi lắp ráp ban đầu. sử dụng nhận dạng xe và các bộ phận có sẵn tài liệu để thiết lập cấu hình có liên quan. khi một danh mục liệt kê một số mô hình, coi đó là thông tin ứng dụng nhà cung cấp để xác nhận chống lại chiếc xe thực tế. không mở rộng danh sách sang một mô hình khác chỉ vì thương hiệu, hình bóng hoặc thời gian sản xuất gần đúng của nó là tương t.
For DZ1321430090 fitment, the catalogue application wording is "Delong F3000, New M3000, and X3000 cabs". Check it against the actual vehicle before closing the item record.
Tách một trận đấu khỏi một sửa đổi
Một thay thế trực tiếp nên phù hợp với cấu hình xe đã thỏa thuận và giao diện.Nếu phần có sẵn cần lỗ mới, một phần mở rộng hàn hoặc một thành phần giao phối khác nhau, cuộc thảo luận đã chuyển sang sửa đổi.Làm cho thay đổi đó rõ ràng và định tuyến nó thông qua kỹ thuật thích hợp và hội thảo xem xét. sự sẵn sàng của một nhà cung cấp để sản xuất một khung tùy chỉnh không làm cho một thích ứng chưa được xem xét một sự thay thế phù hợp.Giữ bản vẽ sửa đổi và các điều kiện chấp nhận của nó tách biệt với phù hợp với phần thường xuyên.
The stated location for DZ1321430090 fitment is "Front suspension mechanism at the front of the cab; serves as the main pivot shaft connecting the frame and cab; acts as the cab tilt fulcrum, providing support, shock absorption, and lateral stability for the front of the cab.". Show the actual installed interface when confirming this position.
Tài liệu những gì được cung cấp
Sử dụng một bức ảnh được đánh dấu hoặc danh sách mục để xác định ranh giới cung cấp. tên sản phẩm có thể mô tả một lắp ráp ngay cả khi cung cấp chỉ bao gồm một khung, trong khi một hình ảnh có thể hiển thị phần cứng không được bao gồm. xác định thành phần trần, bụi cây, tấm, vật giữ và ốc vít riêng biệt khi có liên quan. hỏi xưởng mà các mặt hàng liền kề nó cần cho việc sửa chữa. điều này ngăn cản một phần chính chính xác đến mà không có các thành phần nhỏ cần thiết để hoàn thành công việc.
For DZ1321430090 fitment, the listed material is "Thick-walled round shaft + cast steel swing arm assembly; features internal rubber bushings and black electrophoretic anti-rust coating". Any more precise material requirement remains a separate supplier question.
Một ví dụ khớp thành phần cụ th
Consider an inquiry that begins with the description "cab tilt pivot assembly" and a loose component photograph. The catalogue contains DZ1321430090 (Front Suspension Tilt Shaft Assembly) and WG1642430219 (Cab Front Suspension Tilt Shaft Assembly). The other entry lists its application as Sinotruk "Old" Howo (2007 model) and HOKA cabs; compatible with older Howo dump truck and tractor-trailer models.. Keep the two applications separate until a substitution is specifically confirmed. The recorded position for the requested item is Front suspension mechanism at the front of the cab; serves as the main pivot shaft connecting the frame and cab; acts as the cab tilt fulcrum, providing support, shock absorption, and lateral stability for the front of the cab.; the comparison entry states Front suspension mechanism at the front of the cab; serves as the cab tilt pivot point, connecting the chassis frame to the cab to enable tilting while providing front-end support and shock absorption.. In DZ1321430090 fitment, these are identification clues for a supplier question, not proof of interchangeability. Ask the supplier to mark the offered item on the reference photograph and return the full confirmed code.
Several catalogued tilt assemblies are described as integrated units. Confirm that the offered supply includes the complete shaft and swing-arm arrangement rather than separate pieces assembled for shipping. Treat bushes, retaining hardware and adjacent mounts as explicit quotation items. A different cab generation can change the complete assembly even when the shaft looks familiar.
So sánh các tài liệu tham khảo danh mục trước khi thay thế
| Mã phần | Thành phần | Từ ngữ ứng dụng | Từ ngữ vị trí | Quyết định mua hàng |
|---|---|---|---|---|
| DZ1321430090 | Mặt trận treo nghiêng trục hội | Xe taxi Delong F3000, M3000 mới và X3000 | Cơ cấu treo trước ở phía trước cabin; đóng vai trò là trục xoay chính nối khung và cabin; đóng vai trò là điểm tựa nghiêng của cabin, hỗ trợ, hấp thụ sốc và ổn định ngang cho mặt trước của cabin. | Yêu cầu tham khảo; xác minh chính xác phương tiện và phạm vi |
| WG1642430219 | Cab Front treo nghiêng trục hội | Sinotruk "Old" Howo (2007 model) and HOKA cabs; compatible with older Howo dump truck and tractor-trailer models. | Cơ cấu treo trước ở phía trước cabin; đóng vai trò là điểm xoay nghiêng cabin, kết nối khung gầm với cabin để cho phép nghiêng đồng thời hỗ trợ phần đầu xe và hấp thụ sốc. | Mục danh mục riêng biệt; khả năng thay thế lẫn nhau không được thiết lập |
| EZ16004300028 | Cab Front treo nghiêng Pivot Shaft hội | Được thiết kế dành riêng cho cabin Sinotruk Howo V7X; một thành phần của cụm cabin EZ-series mới. | Nằm ở cơ cấu treo trước nhất của cabin, kết nối khung gầm với cabin. Nó đóng vai trò là điểm xoay để nghiêng cabin và cung cấp hỗ trợ phía trước, hấp thụ sốc và ổn định bên. | Mục danh mục riêng biệt; khả năng thay thế lẫn nhau không được thiết lập |
In DZ1321430090 fitment, the comparison provides a structured supplier question rather than a substitute list. Similar names and nearby codes can describe different working interfaces. Keep a proposed alternative under its own identity until the applicable vehicle configuration and installation requirements have been confirmed.
Control drawing revisions for DZ1321430090 fitment
Cung cấp cho mỗi bản vẽ hoặc tham chiếu được đánh dấu một bản sửa đổi và ngày. giữ phiên bản được chấp nhận với báo giá và thứ tự, và xác định những thay đổi về vị trí lỗ, vật liệu, phạm vi cung cấp hoặc ứng dụng xe.Một tập tin mới có cùng tên có thể tạo ra sự khác biệt không được chú ý giữa hội thảo và nhà cung cấp.Yêu cầu xác nhận bản sửa đổi được chấp nhận thay vì giả định tệp đính kèm mới nhất đã thay thế mọi hướng dẫn trước đó.
Use the shaft and pivot centerline as an item-specific discussion point for DZ1321430090 fitment; document its relationship to the vehicle mounting reference.
Confirm the fastener boundary for DZ1321430090 fitment
Xác định bu lông, đai ốc, vòng đệm và bộ phận giữ nào được cung cấp và được lựa chọn bởi xưởng. kích thước, cấp, điều kiện và phương pháp siết chặt của dây buộc thuộc về phương tiện thích hợp hoặc thông số kỹ thuật đã được phê duyệt. tránh áp dụng mô-men xoắn chung cho khớp không xác định. nếu phần cứng bị thiếu trong ưu đãi, hãy giải quyết kế hoạch cung cấp trước khi gửi đi để thành phần chính chính xác không khiến việc sửa chữa không hoàn thành.
For DZ1321430090 fitment, agree the supply scope of this cab tilt pivot assembly: bare component, associated supports and any included hardware.
Kiểm tra thành phần giao phối
Việc thay thế hoạt động thông qua các kết nối của nó với xe. kiểm tra mặt giao phối, hỗ trợ, bảng điều khiển hoặc lắp ráp liên quan cho thiệt hại và thay đổi trước đó. ghi lại bất kỳ sự không chắc chắn trước khi đặt hàng, đặc biệt là nếu một phần bị loại bỏ đã buộc phải đặt vào vị trí. một nhà cung cấp có thể giúp xác định một thành phần từ các bức ảnh, nhưng hội thảo phải xác định xem giao diện phía xe vẫn phù hợp. thay thế một mục không nên che giấu một vấn đề trong cấu trúc mà nó gắn vào.
Compare the visible working features of Front Suspension Tilt Shaft Assembly with the accepted reference during DZ1321430090 fitment. Resolve any image or delivered-item discrepancy.
Tuyên bố của nhà cung cấp riêng biệt từ hồ sơ đã được xác minh
Thông tin danh mục rất hữu ích cho việc nhận dạng, nhưng hồ sơ đặt hàng phải hiển thị những gì nhà cung cấp đã xác nhận cho yêu cầu thực tế. Giữ các yêu cầu tiếp thị rộng rãi tách biệt với các yêu cầu kỹ thuật. không chuyển đổi tuyên bố chất lượng chung thành chứng nhận, xếp hạng tải hoặc lời hứa trang bị được đảm bảo. Khi không có chi tiết quan trọng, hãy viết một câu hỏi cụ thể và giữ lại câu trả lời với cấu hình được chấp nhận.
Close DZ1321430090 fitment only when the code DZ1321430090, confirmed configuration and responsible decision are recorded together.

Yêu cầu phần được xác nhận và phạm vi cung cấp
For DZ1321430090 fitment, send Leiying the complete code DZ1321430090, vehicle details, installed-location photographs and required quantity. Ask the team to confirm the offered component, included accessories and current supply conditions. Use giải pháp khung tùy chỉnh đối với bối cảnh dịch vụ có liên quan, hoặc duyệt Tham khảo danh mục Flip Axis And Antidrilling Bar.
Để biết thông tin cơ bản chung về các khớp và ốc vít được ghi lại, hãy xem phần Hướng dẫn thiết kế dây buộc của NASA. sử dụng hướng dẫn cụ thể của xe cho việc lắp ráp xe tải thực t.
Những câu hỏi thường gặp
What information is needed for DZ1321430090 fitment?
DZ1321430090 fitment needs the complete code DZ1321430090, the exact vehicle configuration, the installed location and clear photographs of the working interfaces. Add drawings or measured references when a feature is uncertain.
Can DZ1321430090 fitment rely on a catalogue category alone?
No. For DZ1321430090 fitment, use the item-specific record for Front Suspension Tilt Shaft Assembly. The catalogue category groups products for browsing; it does not establish material, handedness or interchangeability.
Which specification controls DZ1321430090 fitment?
DZ1321430090 fitment should use the accepted product configuration and the applicable vehicle or approved engineering documentation. The retrieved catalogue does not supply a universal torque, dimensional tolerance or service limit.
Can the swing arm be ordered as a separate replacement? How does this affect DZ1321430090 fitment?
Only if the supplier and vehicle documentation explicitly identify it as serviceable separately. Some listed tilt assemblies are complete integrated units. Confirm the exact part number and supplied scope before assuming that individual arms or bushes can be replaced. Record that confirmation as part of DZ1321430090 fitment before the purchasing or workshop decision is closed.
Can Leiying help with DZ1321430090 fitment?
Leiying describes part-number, photograph, drawing and sample matching services. Send the references for DZ1321430090 fitment and ask the team to confirm the offered item, included components and current supply conditions before ordering.


