جدول المحتويات
DZ1321430090 fitment begins with a clear decision: Confirm the identity and configuration of a replacement before placing an order. This guide uses Leiying's catalogue entry for Front Suspension Tilt Shaft Assembly, reference DZ1321430090, and turns the listed information into questions a buyer, warehouse team or workshop can use. The intended result is a documented match between the vehicle, part number, mounting interfaces and supplied assembly.
A replacement tilt shaft is needed, but the workshop has only an old assembly and an uncertain cab-series description. The following DZ1321430090 fitment workflow keeps the item-specific catalogue facts visible while distinguishing them from measurements, supplier confirmations and workshop judgements that still need to be obtained.

Catalogue reference for DZ1321430090 fitment
| الحقل المرجعي | معلومات الكتالوج المستردة |
|---|---|
| الرمز المرجعي | DZ1321430090 |
| المكون المدرج | مجموعة عمود إمالة التعليق الأمامي |
| فئة الكتالوج | الوجه المحور وشريط مكافحة الإثارة |
| صياغة التطبيق | كابينة Delong F3000 وM3000 وX3000 الجديدة |
| موقع التثبيت | آلية التعليق الأمامية في الجزء الأمامي من الكابينة؛ بمثابة العمود المحوري الرئيسي الذي يربط الإطار والكابينة؛ يعمل كنقطة ارتكاز لإمالة الكابينة، مما يوفر الدعم وامتصاص الصدمات والاستقرار الجانبي لمقدمة الكابينة. |
| الصياغة المادية | عمود دائري سميك الجدران + مجموعة ذراع متأرجحة من الفولاذ المصبوب؛ يتميز ببطانات مطاطية داخلية وطلاء أسود مضاد للصدأ |
استخدم Front Suspension Tilt Shaft Assembly product entry as the catalogue source for DZ1321430090 fitment. The table reproduces supplier listing information; it does not establish a vehicle-specific approval or an engineering limit. Request missing details against the actual configuration.
Working interfaces for DZ1321430090 fitment
Record overall width together with the distance between the actual mounting references. The outside length of a tube does not establish the working span between its arms. Capture arm angle, bush positions, end geometry and mounting-face orientation. For an integrated assembly, preserve the relationship between the shaft and arms in every photograph and measurement. A loose arm from another unit is not a reliable dimensional reference for the complete assembly.
For DZ1321430090 fitment, document these interfaces: shaft and pivot centerline, swing-arm mounting faces, bush seats and end locations, cab-to-frame attachment points. Keep the working references connected to the actual item and the decision being made.
Read the part number as a complete identifier for DZ1321430090 fitment
انسخ رمز الجزء الكامل، بما في ذلك البادئات واللواحق والفواصل. يمكن أن يشير الرمز غير المكتمل إلى عنصر مختلف، في حين أن الصب ذو المظهر المماثل يمكن أن يحمل تكوينًا آليًا مختلفًا. اطلب من المورد إرجاع الرقم المؤكد كتابيًا مع عرض الأسعار. إذا تم تقديم رمز بديل أو بديل، فاطلب سبب التغيير وتكوين السيارة الذي ينطبق عليه. احتفظ بالمرجع الأصلي والاستبدال المقترح منفصلين حتى يتم قبول المطابقة الفنية.
The requested reference for DZ1321430090 fitment is DZ1321430090, listed as Front Suspension Tilt Shaft Assembly. Preserve that complete identity in the decision record.
حل متغير السيارة
تعد عائلة الطرازات نقطة بداية مفيدة، ولكن المطابقة الكاملة يمكن أن تعتمد على إنشاء الكابينة وتكوين المصد وتخطيط المحور ومراجعة التجميع الأصلية. استخدم تعريف السيارة ووثائق الأجزاء المتاحة لإنشاء التكوين ذي الصلة. عندما يسرد الكتالوج عدة نماذج، تعامل مع ذلك كمعلومات تطبيق المورد للتأكيد مقابل السيارة الفعلية. لا تقم بتوسيع القائمة إلى طراز آخر لمجرد تشابه علامته التجارية أو صورته الظلية أو فترة التصنيع التقريبية.
For DZ1321430090 fitment, the catalogue application wording is "Delong F3000, New M3000, and X3000 cabs". Check it against the actual vehicle before closing the item record.
افصل المباراة عن التعديل
يجب أن يتطابق الاستبدال المباشر مع تكوين السيارة وواجهاتها المتفق عليها. إذا كان الجزء المتاح يحتاج إلى ثقوب جديدة أو امتداد ملحوم أو مكون تزاوج مختلف، فقد انتقلت المناقشة إلى التعديل. اجعل هذا التغيير واضحًا وقم بتوجيهه خلال المراجعة الهندسية وورشة العمل المناسبة. إن رغبة المورد في إنتاج شريحة مخصصة لا تجعل التعديل غير المنقح بديلاً مناسبًا. أبقِ رسم التعديل وشروط قبوله منفصلة عن المطابقة الروتينية للأجزاء.
The stated location for DZ1321430090 fitment is "Front suspension mechanism at the front of the cab; serves as the main pivot shaft connecting the frame and cab; acts as the cab tilt fulcrum, providing support, shock absorption, and lateral stability for the front of the cab.". Show the actual installed interface when confirming this position.
توثيق ما تم توفيره
استخدم صورة مميزة أو قائمة عناصر لتحديد حدود العرض. قد يصف اسم المنتج التجميع حتى عندما يغطي العرض شريحة واحدة فقط، بينما قد تظهر الصورة أجهزة غير متضمنة. حدد المكون العاري والشجيرات والألواح والمثبتات والمثبتات بشكل منفصل حيثما كان ذلك مناسبًا. اسأل ورشة العمل عن العناصر المجاورة التي تحتاجها للإصلاح. وهذا يمنع وصول الجزء الرئيسي الصحيح دون المكونات الصغيرة المطلوبة لإكمال المهمة.
For DZ1321430090 fitment, the listed material is "Thick-walled round shaft + cast steel swing arm assembly; features internal rubber bushings and black electrophoretic anti-rust coating". Any more precise material requirement remains a separate supplier question.
مثال مطابقة خاص بالمكون
Consider an inquiry that begins with the description "cab tilt pivot assembly" and a loose component photograph. The catalogue contains DZ1321430090 (Front Suspension Tilt Shaft Assembly) and WG1642430219 (Cab Front Suspension Tilt Shaft Assembly). The other entry lists its application as Sinotruk "Old" Howo (2007 model) and HOKA cabs; compatible with older Howo dump truck and tractor-trailer models.. Keep the two applications separate until a substitution is specifically confirmed. The recorded position for the requested item is Front suspension mechanism at the front of the cab; serves as the main pivot shaft connecting the frame and cab; acts as the cab tilt fulcrum, providing support, shock absorption, and lateral stability for the front of the cab.; the comparison entry states Front suspension mechanism at the front of the cab; serves as the cab tilt pivot point, connecting the chassis frame to the cab to enable tilting while providing front-end support and shock absorption.. In DZ1321430090 fitment, these are identification clues for a supplier question, not proof of interchangeability. Ask the supplier to mark the offered item on the reference photograph and return the full confirmed code.
Several catalogued tilt assemblies are described as integrated units. Confirm that the offered supply includes the complete shaft and swing-arm arrangement rather than separate pieces assembled for shipping. Treat bushes, retaining hardware and adjacent mounts as explicit quotation items. A different cab generation can change the complete assembly even when the shaft looks familiar.
قارن مراجع الكتالوج قبل الاستبدال
| رمز الجزء | مكون | صياغة التطبيق | صياغة الموقف | قرار الشراء |
|---|---|---|---|---|
| DZ1321430090 | مجموعة عمود إمالة التعليق الأمامي | كابينة Delong F3000 وM3000 وX3000 الجديدة | آلية التعليق الأمامية في الجزء الأمامي من الكابينة؛ بمثابة العمود المحوري الرئيسي الذي يربط الإطار والكابينة؛ يعمل كنقطة ارتكاز لإمالة الكابينة، مما يوفر الدعم وامتصاص الصدمات والاستقرار الجانبي لمقدمة الكابينة. | المرجع المطلوب؛ التحقق من السيارة والنطاق الدقيق |
| WG1642430219 | مجموعة عمود إمالة التعليق الأمامي للكابينة | Sinotruk "Old" Howo (2007 model) and HOKA cabs; compatible with older Howo dump truck and tractor-trailer models. | آلية التعليق الأمامية في الجزء الأمامي من الكابينة؛ تعمل كنقطة محورية لإمالة الكابينة، حيث تربط إطار الهيكل بالكابينة لتمكين الإمالة مع توفير الدعم الأمامي وامتصاص الصدمات. | إدخال كتالوج منفصل؛ لم يتم إنشاء قابلية التبادل |
| EZ16004300028 | مجموعة عمود عمود محوري للإمالة في الكابينة | مصممة خصيصًا لكابينة Sinotruk Howo V7X؛ أحد مكونات مجموعة الكابينة الجديدة من سلسلة EZ. | يقع في آلية التعليق الأمامية للكابينة، ويربط إطار الهيكل بالكابينة. إنه بمثابة النقطة المحورية لإمالة الكابينة ويوفر الدعم الأمامي وامتصاص الصدمات والاستقرار الجانبي. | إدخال كتالوج منفصل؛ لم يتم إنشاء قابلية التبادل |
In DZ1321430090 fitment, the comparison provides a structured supplier question rather than a substitute list. Similar names and nearby codes can describe different working interfaces. Keep a proposed alternative under its own identity until the applicable vehicle configuration and installation requirements have been confirmed.
Control drawing revisions for DZ1321430090 fitment
قم بإعطاء كل رسم أو مرجع مميز مراجعة وتاريخًا. احتفظ بالنسخة المقبولة مع عرض الأسعار والطلب، وحدد التغييرات في موضع الثقب أو المادة أو نطاق التوريد أو تطبيق السيارة. يمكن لملف جديد يحمل نفس الاسم أن يخلق فرقًا غير ملحوظ بين ورشة العمل والمورد. اطلب الإقرار بالمراجعة المقبولة بدلاً من افتراض أن المرفق الأخير قد حل محل كل تعليمات سابقة.
Use the shaft and pivot centerline as an item-specific discussion point for DZ1321430090 fitment; document its relationship to the vehicle mounting reference.
Confirm the fastener boundary for DZ1321430090 fitment
تحديد البراغي والصواميل والغسالات والمثبتات التي يتم توفيرها والتي يتم اختيارها بواسطة ورشة العمل. ينتمي حجم المثبت والدرجة والحالة وطريقة الشد إلى السيارة المناسبة أو المواصفات الهندسية المعتمدة. تجنب تطبيق عزم دوران عام على وصلة غير محددة. إذا كانت الأجهزة مفقودة من العرض، فقم بحل خطة التوريد قبل الإرسال حتى لا يترك المكون الرئيسي الصحيح الإصلاح غير مكتمل.
For DZ1321430090 fitment, agree the supply scope of this cab tilt pivot assembly: bare component, associated supports and any included hardware.
تحقق من مكون التزاوج
يعمل الاستبدال من خلال توصيلاته بالمركبة. فحص وجه التزاوج أو الدعم أو اللوحة أو المجموعة المرتبطة بها بحثًا عن التلف والتغيير السابق. سجل أي عدم يقين قبل الطلب، خاصة إذا تم وضع الجزء الذي تمت إزالته في مكانه. يمكن للمورد المساعدة في تحديد أحد المكونات من الصور الفوتوغرافية، ولكن يجب على ورشة العمل تحديد ما إذا كانت الواجهة الجانبية للمركبة تظل مناسبة أم لا. لا ينبغي أن يؤدي استبدال عنصر واحد إلى إخفاء مشكلة في الهيكل الذي يتصل به.
Compare the visible working features of Front Suspension Tilt Shaft Assembly with the accepted reference during DZ1321430090 fitment. Resolve any image or delivered-item discrepancy.
مطالبات الموردين المنفصلة عن السجلات التي تم التحقق منها
معلومات الكتالوج مفيدة لتحديد الهوية، ولكن يجب أن يوضح سجل الطلب ما أكده المورد للطلب الفعلي. إبقاء المطالبات التسويقية الواسعة منفصلة عن المتطلبات الفنية. لا تقم بتحويل بيان الجودة العام إلى شهادة أو تصنيف تحميل أو وعد تركيب مضمون. عند غياب التفاصيل الهامة، اكتب سؤالاً محددًا واحتفظ بالإجابة بالتكوين المقبول.
Close DZ1321430090 fitment only when the code DZ1321430090, confirmed configuration and responsible decision are recorded together.

اطلب الجزء المؤكد ونطاق التوريد
For DZ1321430090 fitment, send Leiying the complete code DZ1321430090, vehicle details, installed-location photographs and required quantity. Ask the team to confirm the offered component, included accessories and current supply conditions. Use حلول الأقواس المخصصة لسياق الخدمة ذات الصلة، أو تصفح مراجع كتالوج Flip Axis وAntidrilling Bar.
للحصول على خلفية عامة عن المفاصل والمثبتات الموثقة، راجع دليل تصميم السحابة ناسا. استخدم التعليمات الخاصة بالمركبة لتجميع الشاحنة الفعلي.
الأسئلة المتداولة
What information is needed for DZ1321430090 fitment?
DZ1321430090 fitment needs the complete code DZ1321430090, the exact vehicle configuration, the installed location and clear photographs of the working interfaces. Add drawings or measured references when a feature is uncertain.
Can DZ1321430090 fitment rely on a catalogue category alone?
No. For DZ1321430090 fitment, use the item-specific record for Front Suspension Tilt Shaft Assembly. The catalogue category groups products for browsing; it does not establish material, handedness or interchangeability.
Which specification controls DZ1321430090 fitment?
DZ1321430090 fitment should use the accepted product configuration and the applicable vehicle or approved engineering documentation. The retrieved catalogue does not supply a universal torque, dimensional tolerance or service limit.
Can the swing arm be ordered as a separate replacement? How does this affect DZ1321430090 fitment?
Only if the supplier and vehicle documentation explicitly identify it as serviceable separately. Some listed tilt assemblies are complete integrated units. Confirm the exact part number and supplied scope before assuming that individual arms or bushes can be replaced. Record that confirmation as part of DZ1321430090 fitment before the purchasing or workshop decision is closed.
Can Leiying help with DZ1321430090 fitment?
Leiying describes part-number, photograph, drawing and sample matching services. Send the references for DZ1321430090 fitment and ask the team to confirm the offered item, included components and current supply conditions before ordering.


