DZ1321430090 fitment: Front Suspension Tilt Shaft Assembly

Front Suspension Tilt Shaft Assembly

DZ1321430090 fitment begins with a clear decision: Confirm the identity and configuration of a replacement before placing an order. This guide uses Leiying's catalogue entry for Front Suspension Tilt Shaft Assembly, reference DZ1321430090, and turns the listed information into questions a buyer, warehouse team or workshop can use. The intended result is a documented match between the vehicle, part number, mounting interfaces and supplied assembly.

A replacement tilt shaft is needed, but the workshop has only an old assembly and an uncertain cab-series description. The following DZ1321430090 fitment workflow keeps the item-specific catalogue facts visible while distinguishing them from measurements, supplier confirmations and workshop judgements that still need to be obtained.

Front Suspension Tilt Shaft Assembly, catalogue reference DZ1321430090

Catalogue reference for DZ1321430090 fitment

Reference fieldRetrieved catalogue information
Reference codeDZ1321430090
Listed componentFront Suspension Tilt Shaft Assembly
Catalogue categoryFlip Axis And Antidrilling Bar
Application wordingDelong F3000, New M3000, and X3000 cabs
Installation locationFront suspension mechanism at the front of the cab; serves as the main pivot shaft connecting the frame and cab; acts as the cab tilt fulcrum, providing support, shock absorption, and lateral stability for the front of the cab.
Material wordingThick-walled round shaft + cast steel swing arm assembly; features internal rubber bushings and black electrophoretic anti-rust coating

Use the Front Suspension Tilt Shaft Assembly product entry as the catalogue source for DZ1321430090 fitment. The table reproduces supplier listing information; it does not establish a vehicle-specific approval or an engineering limit. Request missing details against the actual configuration.

Working interfaces for DZ1321430090 fitment

Record overall width together with the distance between the actual mounting references. The outside length of a tube does not establish the working span between its arms. Capture arm angle, bush positions, end geometry and mounting-face orientation. For an integrated assembly, preserve the relationship between the shaft and arms in every photograph and measurement. A loose arm from another unit is not a reliable dimensional reference for the complete assembly.

For DZ1321430090 fitment, document these interfaces: shaft and pivot centerline, swing-arm mounting faces, bush seats and end locations, cab-to-frame attachment points. Keep the working references connected to the actual item and the decision being made.

Read the part number as a complete identifier for DZ1321430090 fitment

Copy the full part code, including prefixes, suffixes and separators. An incomplete code can point to a different item, while a similar-looking casting can carry a different machined configuration. Ask the supplier to return the confirmed number in writing with the quotation. If an alternative or superseding code is offered, request the reason for the change and the vehicle configuration to which it applies. Keep the original reference and proposed replacement separate until the technical match has been accepted.

The requested reference for DZ1321430090 fitment is DZ1321430090, listed as Front Suspension Tilt Shaft Assembly. Preserve that complete identity in the decision record.

Resolve the vehicle variant

A model family is a useful starting point, but a complete match can depend on cab generation, bumper configuration, axle layout and the original assembly revision. Use the vehicle identification and available parts documentation to establish the relevant configuration. When a catalogue lists several models, treat that as supplier application information to confirm against the actual vehicle. Do not extend the list to another model simply because its brand, silhouette or approximate manufacturing period is similar.

For DZ1321430090 fitment, the catalogue application wording is "Delong F3000, New M3000, and X3000 cabs". Check it against the actual vehicle before closing the item record.

Separate a match from a modification

A direct replacement should match the agreed vehicle configuration and interfaces. If the available part needs new holes, a welded extension or a different mating component, the discussion has moved into modification. Make that change explicit and route it through the appropriate engineering and workshop review. A supplier's willingness to produce a custom bracket does not make an unreviewed adaptation a suitable replacement. Keep the modification drawing and its acceptance conditions separate from routine part matching.

The stated location for DZ1321430090 fitment is "Front suspension mechanism at the front of the cab; serves as the main pivot shaft connecting the frame and cab; acts as the cab tilt fulcrum, providing support, shock absorption, and lateral stability for the front of the cab.". Show the actual installed interface when confirming this position.

Document what is supplied

Use a marked photograph or item list to define the supply boundary. The product name may describe an assembly even when the offer covers only one bracket, while an image may show hardware that is not included. Identify the bare component, bushes, plates, retainers and fasteners separately where relevant. Ask the workshop which adjoining items it needs for the repair. This prevents a correct main part from arriving without the small components required to complete the job.

For DZ1321430090 fitment, the listed material is "Thick-walled round shaft + cast steel swing arm assembly; features internal rubber bushings and black electrophoretic anti-rust coating". Any more precise material requirement remains a separate supplier question.

A component-specific matching example

Consider an inquiry that begins with the description "cab tilt pivot assembly" and a loose component photograph. The catalogue contains DZ1321430090 (Front Suspension Tilt Shaft Assembly) and WG1642430219 (Cab Front Suspension Tilt Shaft Assembly). The other entry lists its application as Sinotruk "Old" Howo (2007 model) and HOKA cabs; compatible with older Howo dump truck and tractor-trailer models.. Keep the two applications separate until a substitution is specifically confirmed. The recorded position for the requested item is Front suspension mechanism at the front of the cab; serves as the main pivot shaft connecting the frame and cab; acts as the cab tilt fulcrum, providing support, shock absorption, and lateral stability for the front of the cab.; the comparison entry states Front suspension mechanism at the front of the cab; serves as the cab tilt pivot point, connecting the chassis frame to the cab to enable tilting while providing front-end support and shock absorption.. In DZ1321430090 fitment, these are identification clues for a supplier question, not proof of interchangeability. Ask the supplier to mark the offered item on the reference photograph and return the full confirmed code.

Several catalogued tilt assemblies are described as integrated units. Confirm that the offered supply includes the complete shaft and swing-arm arrangement rather than separate pieces assembled for shipping. Treat bushes, retaining hardware and adjacent mounts as explicit quotation items. A different cab generation can change the complete assembly even when the shaft looks familiar.

Compare catalogue references before a substitution

Part codeComponentApplication wordingPosition wordingPurchasing decision
DZ1321430090Front Suspension Tilt Shaft AssemblyDelong F3000, New M3000, and X3000 cabsFront suspension mechanism at the front of the cab; serves as the main pivot shaft connecting the frame and cab; acts as the cab tilt fulcrum, providing support, shock absorption, and lateral stability for the front of the cab.Requested reference; verify exact vehicle and scope
WG1642430219Cab Front Suspension Tilt Shaft AssemblySinotruk "Old" Howo (2007 model) and HOKA cabs; compatible with older Howo dump truck and tractor-trailer models.Front suspension mechanism at the front of the cab; serves as the cab tilt pivot point, connecting the chassis frame to the cab to enable tilting while providing front-end support and shock absorption.Separate catalogue entry; interchangeability not established
EZ16004300028Cab Front Suspension Tilt Pivot Shaft AssemblyDesigned specifically for the Sinotruk Howo V7X cab; a component of the new EZ-series cab assembly.Located at the front-most suspension mechanism of the cab, connecting the chassis frame to the cab. It serves as the pivot point for cab tilting and provides front-end support, shock absorption, and lateral stability.Separate catalogue entry; interchangeability not established

In DZ1321430090 fitment, the comparison provides a structured supplier question rather than a substitute list. Similar names and nearby codes can describe different working interfaces. Keep a proposed alternative under its own identity until the applicable vehicle configuration and installation requirements have been confirmed.

Control drawing revisions for DZ1321430090 fitment

Give each drawing or marked reference a revision and date. Keep the accepted version with the quotation and order, and identify changes in hole position, material, supply scope or vehicle application. A new file with the same name can create an unnoticed difference between the workshop and supplier. Ask for acknowledgement of the accepted revision rather than assuming the latest attachment has replaced every earlier instruction.

Use the shaft and pivot centerline as an item-specific discussion point for DZ1321430090 fitment; document its relationship to the vehicle mounting reference.

Confirm the fastener boundary for DZ1321430090 fitment

Identify which bolts, nuts, washers and retainers are supplied and which are selected by the workshop. Fastener size, grade, condition and tightening method belong to the appropriate vehicle or approved engineering specification. Avoid applying a generic torque to an unidentified joint. If hardware is missing from the offer, resolve the supply plan before dispatch so a correct main component does not leave the repair incomplete.

For DZ1321430090 fitment, agree the supply scope of this cab tilt pivot assembly: bare component, associated supports and any included hardware.

Check the mating component

The replacement works through its connections to the vehicle. Inspect the mating face, support, panel or associated assembly for damage and previous alteration. Record any uncertainty before ordering, especially if a removed part was forced into place. A supplier can help identify a component from photographs, but the workshop must determine whether the vehicle-side interface remains suitable. Replacing one item should not conceal a problem in the structure it attaches to.

Compare the visible working features of Front Suspension Tilt Shaft Assembly with the accepted reference during DZ1321430090 fitment. Resolve any image or delivered-item discrepancy.

Separate supplier claims from verified records

Catalogue information is useful for identification, but the order record should show what the supplier confirmed for the actual request. Keep broad marketing claims separate from technical requirements. Do not convert a general quality statement into a certification, load rating or guaranteed fitment promise. When a critical detail is absent, write a specific question and retain the answer with the accepted configuration.

Close DZ1321430090 fitment only when the code DZ1321430090, confirmed configuration and responsible decision are recorded together.

DZ1321430090 fitment: illustrative parts identification workspace

Request the confirmed part and supply scope

For DZ1321430090 fitment, send Leiying the complete code DZ1321430090, vehicle details, installed-location photographs and required quantity. Ask the team to confirm the offered component, included accessories and current supply conditions. Use custom bracket solutions for the relevant service context, or browse Flip Axis And Antidrilling Bar catalogue references.

For general background on documented joints and fasteners, see the NASA Fastener Design Manual. Use vehicle-specific instructions for the actual truck assembly.

Frequently asked questions

What information is needed for DZ1321430090 fitment?

DZ1321430090 fitment needs the complete code DZ1321430090, the exact vehicle configuration, the installed location and clear photographs of the working interfaces. Add drawings or measured references when a feature is uncertain.

Can DZ1321430090 fitment rely on a catalogue category alone?

No. For DZ1321430090 fitment, use the item-specific record for Front Suspension Tilt Shaft Assembly. The catalogue category groups products for browsing; it does not establish material, handedness or interchangeability.

Which specification controls DZ1321430090 fitment?

DZ1321430090 fitment should use the accepted product configuration and the applicable vehicle or approved engineering documentation. The retrieved catalogue does not supply a universal torque, dimensional tolerance or service limit.

Can the swing arm be ordered as a separate replacement? How does this affect DZ1321430090 fitment?

Only if the supplier and vehicle documentation explicitly identify it as serviceable separately. Some listed tilt assemblies are complete integrated units. Confirm the exact part number and supplied scope before assuming that individual arms or bushes can be replaced. Record that confirmation as part of DZ1321430090 fitment before the purchasing or workshop decision is closed.

Can Leiying help with DZ1321430090 fitment?

Leiying describes part-number, photograph, drawing and sample matching services. Send the references for DZ1321430090 fitment and ask the team to confirm the offered item, included components and current supply conditions before ordering.

官网询盘

Share the article to:

Facebook
X
LinkedIn

About Shandong Leiying

Shandong Leiying Auto Parts supplies heavy truck brackets, chassis parts, body parts and OEM custom components for repair, maintenance and modification projects. We support part-number matching, sample-based production and factory-direct supply.

Please leave your information so we can get in touch with you and help you find the best plan for you.
官网询盘