Raccord DZ98149622109 : ensemble de support de phare de pare-chocs gauche

DZ98149622109 fitment begins with a clear decision: Confirm the identity and configuration of a replacement before placing an order. This guide uses Leiying's catalogue entry for Left Bumper Headlight Bracket Assembly, reference DZ98149622109, and turns the listed information into questions a buyer, warehouse team or workshop can use. The intended result is a documented match between the vehicle, part number, mounting interfaces and supplied assembly.

A body repair needs the correct support behind the bumper, where lamp and trim interfaces can be confused. The following DZ98149622109 fitment workflow keeps the item-specific catalogue facts visible while distinguishing them from measurements, supplier confirmations and workshop judgements that still need to be obtained.

Catalogue reference for DZ98149622109 fitment

Utilisez le Left Bumper Headlight Bracket Assembly product entry as the catalogue source for DZ98149622109 fitment. The table reproduces supplier listing information; it does not establish a vehicle-specific approval or an engineering limit. Request missing details against the actual configuration.

Working interfaces for DZ98149622109 fitment

Photograph the support from the frame side and from the bumper side. Record the mounting-plane offset, boss positions and the direction of the supported face. A bracket labelled rear-right in the catalogue may refer to the rear portion of the bumper arrangement rather than the rear bumper of the vehicle; resolve the installed location with the supplier instead of translating the title into an assumption.

For DZ98149622109 fitment, document these interfaces: frame attachment face, bumper support points, lamp or trim interface where specified, clearance behind the bumper cover. Keep the working references connected to the actual item and the decision being made.

Start with the installed part for DZ98149622109 fitment

Begin the matching process with the item on the vehicle, rather than a photograph found in an old sales message. Record the readable identification mark, the vehicle's exact cab or chassis version and the installation area. If the removed part has lost its label, photograph the mating component and the surrounding mounting position as well. A supplier needs that context to distinguish an identification problem from a replacement-design request. Keep uncertain characters in the code marked as uncertain instead of silently correcting them.

The requested reference for DZ98149622109 fitment is DZ98149622109, listed as Left Bumper Headlight Bracket Assembly. Preserve that complete identity in the decision record.

Read the part number as a complete identifier

Copiez le code de la pièce complète, y compris les préfixes, les suffixes et les séparateurs Un code incomplet peut pointer vers un article différent, tandis qu'un moulage d'apparence similaire peut porter une configuration usinée différente Demandez au fournisseur de retourner le numéro confirmé par écrit avec le devis Si un code alternatif ou remplaçant est proposé, demandez la raison du changement et la configuration du véhicule à laquelle il s'applique Gardez la référence originale et le remplacement proposé séparés jusqu'à ce que la correspondance technique ait été acceptée.

For DZ98149622109 fitment, the catalogue application wording is "Shacman Delong L5000 series". Check it against the actual vehicle before closing the item record.

Define orientation from the vehicle

Use the vehicle's installed orientation when documenting left and right. Show the direction of travel in an overview photograph, then mark the mounting face in a close-up. A loose part can appear reversed when photographed from its underside. Distinguish side from position within an assembly, such as a rear support for a front-mounted body component. If descriptions conflict, ask the supplier to identify the item on an installed-location drawing before the purchase order is released.

The stated location for DZ98149622109 fitment is "Front left side of the frame, inside the bumper". Show the actual installed interface when confirming this position.

Compte pour les réparations précédentes

Demandez si la zone de montage a été modifiée, renforcée ou réparée Un remplacement peut correspondre à la conception originale tout en étant en désaccord avec une interface de véhicule modifiée précédemment Photographier les plaques ajoutées, les trous non originaux et les supports modifiés sans supposer qu'ils sont acceptables L'atelier devrait déterminer la configuration correcte de réparation Gardez cet historique visible pour le fournisseur afin qu'un échantillon modifié ne soit pas confondu avec la géométrie de production prévue.

For DZ98149622109 fitment, the listed material is "Cast aluminum". Any more precise material requirement remains a separate supplier question.

Un exemple de correspondance spécifique à un composant

Consider an inquiry that begins with the description "bumper or headlight support bracket" and a loose component photograph. The catalogue contains DZ98149622109 (Left Bumper Headlight Bracket Assembly) and DZ9X259624016 (Left Bumper Headlight Bracket Assembly). The other entry lists its application as Shacman Delong X5000S. Keep the two applications separate until a substitution is specifically confirmed. The recorded position for the requested item is Front left side of the frame, inside the bumper; the comparison entry states Front left side of the frame, inside the bumper. In DZ98149622109 fitment, these are identification clues for a supplier question, not proof of interchangeability. Ask the supplier to mark the offered item on the reference photograph and return the full confirmed code.

Ask whether the quotation includes the support bracket only, its adjoining lamp carrier, trim fasteners or a wider bumper assembly. Cast aluminum and stamped-metal supports occur in the catalogue, so material must be checked by code. Do not substitute one because the outside outline appears similar or because both sit in a headlight-related category.

Comparez les références du catalogue avant une substitution

In DZ98149622109 fitment, the comparison provides a structured supplier question rather than a substitute list. Similar names and nearby codes can describe different working interfaces. Keep a proposed alternative under its own identity until the applicable vehicle configuration and installation requirements have been confirmed.

Construisez un ensemble de photographies utiles

Un jeu d'images utiles montre le composant complet, à la fois les faces de travail et les caractéristiques de montage qui le distinguent Gardez la pièce dans une orientation cohérente et placez une échelle lisible près de la caractéristique discutée Ajoutez un aperçu installé lorsque la position est incertaine Évitez d'utiliser une image éditée ou recadrée qui supprime le boss ou la languette de montage même que le fournisseur doit voir La photographie enregistre la géométrie visible ; les spécifications cachées ont encore besoin d'une confirmation écrite.

Use the frame attachment face as an item-specific discussion point for DZ98149622109 fitment; document its relationship to the vehicle mounting reference.

Control drawing revisions

Give each drawing or marked reference a revision and date. Keep the accepted version with the quotation and order, and identify changes in hole position, material, supply scope or vehicle application. A new file with the same name can create an unnoticed difference between the workshop and supplier. Ask for acknowledgement of the accepted revision rather than assuming the latest attachment has replaced every earlier instruction.

For DZ98149622109 fitment, agree the supply scope of this bumper or headlight support bracket: bare component, associated supports and any included hardware.

Use samples without copying damage

A physical sample can communicate shape and assembly relationships, but a removed component may be bent, worn or repaired. Identify these areas before treating the sample as a design reference. Combine it with vehicle documentation and the intended working interfaces. Agree which features the supplier may reproduce and which require a drawing or technical clarification. Preserve the sample identity so its condition cannot be confused with an approved new part.

Compare the visible working features of Left Bumper Headlight Bracket Assembly with the accepted reference during DZ98149622109 fitment. Resolve any image or delivered-item discrepancy.

Gardez un article retourné hors de stock normal

Un composant retourné a besoin de vérifications d'identité, d'exhaustivité et d'état avant qu'il ne redevienne disponible Enregistrez s'il a été installé, manipulé, modifié ou simplement envoyé au mauvais atelier Conservez son emballage et ses accessoires là où cela est pratique Une apparence inutilisée n'est pas la preuve que l'article répond toujours à la configuration acceptée Donnez au retour une disposition claire afin qu'un cueilleur ultérieur n'envoie pas sans le savoir une partie incertaine à une autre réparation.

Close DZ98149622109 fitment only when the code DZ98149622109, confirmed configuration and responsible decision are recorded together.

Demandez la pièce confirmée et la portée de fourniture

For DZ98149622109 fitment, send Leiying the complete code DZ98149622109, vehicle details, installed-location photographs and required quantity. Ask the team to confirm the offered component, included accessories and current supply conditions. Use repair parts supply pour le contexte de service pertinent, ou parcourez Aluminum Part catalogue references.

Pour un contexte général sur les joints et fixations documentés, voir le Manuel de conception des fixations de la NASA. Utilisez des instructions spécifiques au véhicule pour l'assemblage réel du camion.

Questions fréquemment posées