DZ97259538806 fitment: Radiator Limit Bracket

DZ97259538806 fitment begins with a clear decision: Confirm the identity and configuration of a replacement before placing an order. This guide uses Leiying's catalogue entry for Radiator Limit Bracket, reference DZ97259538806, and turns the listed information into questions a buyer, warehouse team or workshop can use. The intended result is a documented match between the vehicle, part number, mounting interfaces and supplied assembly.

A cooling-system repair requires a support that matches the radiator and the surrounding frame interfaces. The following DZ97259538806 fitment workflow keeps the item-specific catalogue facts visible while distinguishing them from measurements, supplier confirmations and workshop judgements that still need to be obtained.

Catalogue reference for DZ97259538806 fitment

Use the Radiator Limit Bracket product entry as the catalogue source for DZ97259538806 fitment. The table reproduces supplier listing information; it does not establish a vehicle-specific approval or an engineering limit. Request missing details against the actual configuration.

Working interfaces for DZ97259538806 fitment

Measure from the frame mounting reference to the radiator contact or locating face. Include the height and offset of any boss, the direction of the working face and the position of cushions or isolators. A lower-right limit bracket and an upper-left support may have very different geometry despite similar material and overall size. Confirm the radiator arrangement and frame version before using a vehicle-series name as the only match criterion.

For DZ97259538806 fitment, document these interfaces: radiator support or locating face, frame mounting face, isolator or cushion position, clearance to hoses, tank and cooling pack. Keep the working references connected to the actual item and the decision being made.

Start with the installed part for DZ97259538806 fitment

Begin the matching process with the item on the vehicle, rather than a photograph found in an old sales message. Record the readable identification mark, the vehicle's exact cab or chassis version and the installation area. If the removed part has lost its label, photograph the mating component and the surrounding mounting position as well. A supplier needs that context to distinguish an identification problem from a replacement-design request. Keep uncertain characters in the code marked as uncertain instead of silently correcting them.

The requested reference for DZ97259538806 fitment is DZ97259538806, listed as Radiator Limit Bracket. Preserve that complete identity in the decision record.

Resolve the vehicle variant

A model family is a useful starting point, but a complete match can depend on cab generation, bumper configuration, axle layout and the original assembly revision. Use the vehicle identification and available parts documentation to establish the relevant configuration. When a catalogue lists several models, treat that as supplier application information to confirm against the actual vehicle. Do not extend the list to another model simply because its brand, silhouette or approximate manufacturing period is similar.

For DZ97259538806 fitment, the catalogue application wording is "Shacman Delong X3000". Check it against the actual vehicle before closing the item record.

Define orientation from the vehicle

Use the vehicle's installed orientation when documenting left and right. Show the direction of travel in an overview photograph, then mark the mounting face in a close-up. A loose part can appear reversed when photographed from its underside. Distinguish side from position within an assembly, such as a rear support for a front-mounted body component. If descriptions conflict, ask the supplier to identify the item on an installed-location drawing before the purchase order is released.

The stated location for DZ97259538806 fitment is "Front of the frame, at the lower-right corner of the radiator tank". Show the actual installed interface when confirming this position.

Use an installed photograph to resolve location

Take a wide view showing the component's relationship to the cab, frame or axle, followed by close-ups of its fixing points. The wide view resolves position while the details show the interfaces. Neither view replaces the other. A loose bracket photographed on a bench may be recognisable yet still ambiguous about mounting side. Add a simple arrow or written location reference so the supplier can answer the actual application question.

For DZ97259538806 fitment, the listed material is "Cast aluminum". Any more precise material requirement remains a separate supplier question.

A component-specific matching example

Consider an inquiry that begins with the description "radiator support bracket" and a loose component photograph. The catalogue contains DZ97259538806 (Radiator Limit Bracket) and DZ96259538232 (Radiator Right Support Seat). The other entry lists its application as Shacman Delong H3000. Keep the two applications separate until a substitution is specifically confirmed. The recorded position for the requested item is Front of the frame, at the lower-right corner of the radiator tank; the comparison entry states Front of the frame, on the right side of the radiator tank. In DZ97259538806 fitment, these are identification clues for a supplier question, not proof of interchangeability. Ask the supplier to mark the offered item on the reference photograph and return the full confirmed code.

Define whether the order includes the bare support, rubber isolator, retaining clip, bolts or a wider radiator mounting set. The supplier's casting description does not specify the composition of every item in that set. If the cooling pack has been changed, send photographs of the actual installation and its mating faces rather than relying only on an old invoice.

Compare catalogue references before a substitution

In DZ97259538806 fitment, the comparison provides a structured supplier question rather than a substitute list. Similar names and nearby codes can describe different working interfaces. Keep a proposed alternative under its own identity until the applicable vehicle configuration and installation requirements have been confirmed.

Define the measuring references

Choose reference faces that another person can locate consistently. Mark them on a sketch before recording hole positions or offsets. Keep the unit of measurement explicit and avoid mixing overall dimensions with working dimensions. If two people measure from opposite faces, their results can disagree even when neither measurement is careless. A repeatable reference system makes that difference visible and helps the supplier answer the actual geometry question.

Use the radiator support or locating face as an item-specific discussion point for DZ97259538806 fitment; document its relationship to the vehicle mounting reference.

Confirm the fastener boundary

Identify which bolts, nuts, washers and retainers are supplied and which are selected by the workshop. Fastener size, grade, condition and tightening method belong to the appropriate vehicle or approved engineering specification. Avoid applying a generic torque to an unidentified joint. If hardware is missing from the offer, resolve the supply plan before dispatch so a correct main component does not leave the repair incomplete.

For DZ97259538806 fitment, agree the supply scope of this radiator support bracket: bare component, associated supports and any included hardware.

Avoid ambiguous vehicle terminology

Use the exact model and cab description available from the vehicle and its parts records. Translate informal workshop names into confirmed identifiers before the order is placed. Terms such as old model, new cab or high bumper need a reference that the supplier can recognise. Retain the original description where necessary and ask for clarification, rather than replacing it with an assumed production year or unsupported model equivalence.

Compare the visible working features of Radiator Limit Bracket with the accepted reference during DZ97259538806 fitment. Resolve any image or delivered-item discrepancy.

Link packing to receiving checks

The packing specification and receiving checklist should refer to the same vulnerable features. If a projecting mount must be protected, receiving staff should know where to inspect it. Keep packing photographs with the delivery record when requested. This connection helps distinguish a manufacturing difference from transit damage and gives the supplier useful evidence for improving future shipments.

Close DZ97259538806 fitment only when the code DZ97259538806, confirmed configuration and responsible decision are recorded together.

Request the confirmed part and supply scope

For DZ97259538806 fitment, send Leiying the complete code DZ97259538806, vehicle details, installed-location photographs and required quantity. Ask the team to confirm the offered component, included accessories and current supply conditions. Use repair parts supply for the relevant service context, or browse Aluminum Part catalogue references.

For general background on documented joints and fasteners, see the NASA Fastener Design Manual. Use vehicle-specific instructions for the actual truck assembly.

Frequently asked questions