Table of Contents
DZ97259538801 fitment begins with a clear decision: Confirm the identity and configuration of a replacement before placing an order. This guide uses Leiying's catalogue entry for Upper Aluminum Radiator Tank Bracket, reference DZ97259538801, and turns the listed information into questions a buyer, warehouse team or workshop can use. The intended result is a documented match between the vehicle, part number, mounting interfaces and supplied assembly.
A cooling-system repair requires a support that matches the radiator and the surrounding frame interfaces. The following DZ97259538801 fitment workflow keeps the item-specific catalogue facts visible while distinguishing them from measurements, supplier confirmations and workshop judgements that still need to be obtained.

Catalogue reference for DZ97259538801 fitment
| Reference field | Retrieved catalogue information |
|---|---|
| Reference code | DZ97259538801 |
| Listed component | Upper Aluminum Radiator Tank Bracket |
| Catalogue category | Aluminum Part |
| Application wording | Shacman Delong X3000 |
| Installation location | Front of the frame, at the upper-left corner of the radiator tank |
| Material wording | material not stated in the retrieved product entry |
Use the Upper Aluminum Radiator Tank Bracket product entry as the catalogue source for DZ97259538801 fitment. The table reproduces supplier listing information; it does not establish a vehicle-specific approval or an engineering limit. Request missing details against the actual configuration.
Item-specific clarification: The retrieved entry does not identify a material specification; the product title alone must not be used to assign an alloy grade.
Working interfaces for DZ97259538801 fitment
Measure from the frame mounting reference to the radiator contact or locating face. Include the height and offset of any boss, the direction of the working face and the position of cushions or isolators. A lower-right limit bracket and an upper-left support may have very different geometry despite similar material and overall size. Confirm the radiator arrangement and frame version before using a vehicle-series name as the only match criterion.
For DZ97259538801 fitment, document these interfaces: radiator support or locating face, frame mounting face, isolator or cushion position, clearance to hoses, tank and cooling pack. Keep the working references connected to the actual item and the decision being made.
Define orientation from the vehicle for DZ97259538801 fitment
Use the vehicle's installed orientation when documenting left and right. Show the direction of travel in an overview photograph, then mark the mounting face in a close-up. A loose part can appear reversed when photographed from its underside. Distinguish side from position within an assembly, such as a rear support for a front-mounted body component. If descriptions conflict, ask the supplier to identify the item on an installed-location drawing before the purchase order is released.
The requested reference for DZ97259538801 fitment is DZ97259538801, listed as Upper Aluminum Radiator Tank Bracket. Preserve that complete identity in the decision record.
Separate a match from a modification
A direct replacement should match the agreed vehicle configuration and interfaces. If the available part needs new holes, a welded extension or a different mating component, the discussion has moved into modification. Make that change explicit and route it through the appropriate engineering and workshop review. A supplier's willingness to produce a custom bracket does not make an unreviewed adaptation a suitable replacement. Keep the modification drawing and its acceptance conditions separate from routine part matching.
For DZ97259538801 fitment, the catalogue application wording is "Shacman Delong X3000". Check it against the actual vehicle before closing the item record.
Ask what changed in a revised component
When the supplier offers a revised number, ask which interfaces or included items changed and whether the revision applies to the requested configuration. A changed suffix can be a useful identification clue, but it does not explain the change by itself. Preserve the supplier's explanation and any supporting drawing with the order. If the revision needs an additional mating component, list that item explicitly before describing the offer as a direct replacement.
The stated location for DZ97259538801 fitment is "Front of the frame, at the upper-left corner of the radiator tank". Show the actual installed interface when confirming this position.
Keep a matched pair distinct from two identical pieces
Where a repair needs left and right components, confirm whether the order is a matched pair or two units of one code. Similar names can hide this quantity difference. Ask the supplier to identify each component separately and show the pair in the quotation. For non-handed assemblies, obtain that confirmation explicitly rather than creating an unnecessary mirror-image item in the stock record.
For DZ97259538801 fitment, the listed material is "material not stated in the retrieved product entry". Any more precise material requirement remains a separate supplier question.
A component-specific matching example
Consider an inquiry that begins with the description "radiator support bracket" and a loose component photograph. The catalogue contains DZ97259538801 (Upper Aluminum Radiator Tank Bracket) and DZ96259538232 (Radiator Right Support Seat). The other entry lists its application as Shacman Delong H3000. Keep the two applications separate until a substitution is specifically confirmed. The recorded position for the requested item is Front of the frame, at the upper-left corner of the radiator tank; the comparison entry states Front of the frame, on the right side of the radiator tank. In DZ97259538801 fitment, these are identification clues for a supplier question, not proof of interchangeability. Ask the supplier to mark the offered item on the reference photograph and return the full confirmed code.
Define whether the order includes the bare support, rubber isolator, retaining clip, bolts or a wider radiator mounting set. The supplier's casting description does not specify the composition of every item in that set. If the cooling pack has been changed, send photographs of the actual installation and its mating faces rather than relying only on an old invoice.
Compare catalogue references before a substitution
| Part code | Component | Application wording | Position wording | Purchasing decision |
|---|---|---|---|---|
| DZ97259538801 | Upper Aluminum Radiator Tank Bracket | Shacman Delong X3000 | Front of the frame, at the upper-left corner of the radiator tank | Requested reference; verify exact vehicle and scope |
| DZ96259538232 | Radiator Right Support Seat | Shacman Delong H3000 | Front of the frame, on the right side of the radiator tank | Separate catalogue entry; interchangeability not established |
| DZ97259538803 | Radiator Left Bracket | Shacman Delong X3000 | Front left side of the frame, at the lower side of the radiator | Separate catalogue entry; interchangeability not established |
In DZ97259538801 fitment, the comparison provides a structured supplier question rather than a substitute list. Similar names and nearby codes can describe different working interfaces. Keep a proposed alternative under its own identity until the applicable vehicle configuration and installation requirements have been confirmed.
Define the measuring references
Choose reference faces that another person can locate consistently. Mark them on a sketch before recording hole positions or offsets. Keep the unit of measurement explicit and avoid mixing overall dimensions with working dimensions. If two people measure from opposite faces, their results can disagree even when neither measurement is careless. A repeatable reference system makes that difference visible and helps the supplier answer the actual geometry question.
Use the radiator support or locating face as an item-specific discussion point for DZ97259538801 fitment; document its relationship to the vehicle mounting reference.
Specify material evidence proportionately
Use the material description for the exact item as the starting point, then define any documentation required by the purchase specification. Appearance, colour and approximate weight cannot establish alloy grade, heat treatment or internal quality. If a certificate is required, ask how it links to the supplied item or lot. Keep an unspecified grade marked as unconfirmed rather than converting a general word such as aluminum or steel into a precise engineering claim.
For DZ97259538801 fitment, agree the supply scope of this radiator support bracket: bare component, associated supports and any included hardware.
Create a sensible reorder description
A repeat-order description should preserve the accepted code, vehicle range, side, mounting position and assembly scope. Include the current reference image and revision rather than reusing a short informal name. Review the description whenever a delivery differs from the accepted item. This turns earlier matching work into a practical purchasing reference and prevents a successful one-off repair from being followed by an ambiguous repeat order.
Compare the visible working features of Upper Aluminum Radiator Tank Bracket with the accepted reference during DZ97259538801 fitment. Resolve any image or delivered-item discrepancy.
Keep a returned item out of normal stock
A returned component needs identity, completeness and condition checks before it becomes available again. Record whether it was installed, handled, modified or merely sent to the wrong workshop. Preserve its packaging and accessories where practical. An unused appearance is not proof that the item still meets the accepted configuration. Give the return a clear disposition so a later picker does not unknowingly send an uncertain part to another repair.
Close DZ97259538801 fitment only when the code DZ97259538801, confirmed configuration and responsible decision are recorded together.

Request the confirmed part and supply scope
For DZ97259538801 fitment, send Leiying the complete code DZ97259538801, vehicle details, installed-location photographs and required quantity. Ask the team to confirm the offered component, included accessories and current supply conditions. Use repair parts supply for the relevant service context, or browse Aluminum Part catalogue references.
For general background on documented joints and fasteners, see the NASA Fastener Design Manual. Use vehicle-specific instructions for the actual truck assembly.
Frequently asked questions
What information is needed for DZ97259538801 fitment?
DZ97259538801 fitment needs the complete code DZ97259538801, the exact vehicle configuration, the installed location and clear photographs of the working interfaces. Add drawings or measured references when a feature is uncertain.
Can DZ97259538801 fitment rely on a catalogue category alone?
No. For DZ97259538801 fitment, use the item-specific record for Upper Aluminum Radiator Tank Bracket. The catalogue category groups products for browsing; it does not establish material, handedness or interchangeability.
Which specification controls DZ97259538801 fitment?
DZ97259538801 fitment should use the accepted product configuration and the applicable vehicle or approved engineering documentation. The retrieved catalogue does not supply a universal torque, dimensional tolerance or service limit.
Can a radiator limit bracket replace a radiator support seat? How does this affect DZ97259538801 fitment?
Do not assume that it can. A locating or limit function differs from a support function. Check the exact part number, mounting location and radiator arrangement against the vehicle and supplier documentation. Record that confirmation as part of DZ97259538801 fitment before the purchasing or workshop decision is closed.
Can Leiying help with DZ97259538801 fitment?
Leiying describes part-number, photograph, drawing and sample matching services. Send the references for DZ97259538801 fitment and ask the team to confirm the offered item, included components and current supply conditions before ordering.

