712W41300-0000 fitment: Front-Left Suspension Bracket Assembly

712W41300-0000 fitment begins with a clear decision: Confirm the identity and configuration of a replacement before placing an order. This guide uses Leiying's catalogue entry for Front-Left Suspension Bracket Assembly, reference 712W41300-0000, and turns the listed information into questions a buyer, warehouse team or workshop can use. The intended result is a documented match between the vehicle, part number, mounting interfaces and supplied assembly.

A front support needs replacement after repair, with uncertainty about the mounting side or the cab suspension arrangement. The following 712W41300-0000 fitment workflow keeps the item-specific catalogue facts visible while distinguishing them from measurements, supplier confirmations and workshop judgements that still need to be obtained.

Catalogue reference for 712W41300-0000 fitment

Use the Front-Left Suspension Bracket Assembly product entry as the catalogue source for 712W41300-0000 fitment. The table reproduces supplier listing information; it does not establish a vehicle-specific approval or an engineering limit. Request missing details against the actual configuration.

Working interfaces for 712W41300-0000 fitment

Use the frame mounting face as the primary reference and describe the position of each working boss relative to it. Front-left and front-right suspension supports can have corresponding names yet different offsets. If a title states one side but the installation field states another, do not choose between them by intuition. Send the installed photograph and ask for written clarification against the exact part code.

For 712W41300-0000 fitment, document these interfaces: frame side-member contact face, cab suspension or combination support, mounting bosses and bolt pattern, adjacent front-end clearances. Keep the working references connected to the actual item and the decision being made.

Read the part number as a complete identifier for 712W41300-0000 fitment

Copy the full part code, including prefixes, suffixes and separators. An incomplete code can point to a different item, while a similar-looking casting can carry a different machined configuration. Ask the supplier to return the confirmed number in writing with the quotation. If an alternative or superseding code is offered, request the reason for the change and the vehicle configuration to which it applies. Keep the original reference and proposed replacement separate until the technical match has been accepted.

The requested reference for 712W41300-0000 fitment is 712W41300-0000, listed as Front-Left Suspension Bracket Assembly. Preserve that complete identity in the decision record.

Use geometry to confirm the match

Compare the mounting interfaces that control installation. Select stable reference faces, then record hole centers, offsets, working-face direction and the space required by adjacent parts. Keep each dimension tied to a marked point so that another person can repeat the observation. A general length or a photograph without a scale is rarely enough to confirm the working geometry. The objective is to establish a match to the approved design, not to reverse engineer tolerances from a worn item.

For 712W41300-0000 fitment, the catalogue application wording is "HOWO T7H, SITRAK C7H". Check it against the actual vehicle before closing the item record.

Close the identification record

Finish the fitment record with the accepted code, vehicle configuration, mounting location and reference images. List unresolved questions rather than hiding them in an informal conversation. The buyer, supplier and workshop should work from the same confirmed reference. Retain the record with the order so a repeat purchase can use the accepted configuration. Recheck it when the vehicle, supplier or delivered revision changes; a previous successful order does not automatically validate every future variant.

The stated location for 712W41300-0000 fitment is "Front-left side of the cab; mounting point for the front suspension tilting mechanism". Show the actual installed interface when confirming this position.

Confirm complete and bare-component references

A complete assembly number may differ from the number on one constituent casting or support. Record both when the available documentation provides them, and ask which one the supplier is quoting. A mark on a loose component does not automatically identify every part shown in an assembly photograph. Confirm the supply boundary and the associated code together, particularly when the workshop expects bushes, arms or other fitted items.

For 712W41300-0000 fitment, the listed material is "Cast aluminum". Any more precise material requirement remains a separate supplier question.

A component-specific matching example

Consider an inquiry that begins with the description "front frame or suspension bracket" and a loose component photograph. The catalogue contains 712W41300-0000 (Front-Left Suspension Bracket Assembly) and WG9925931702 (Right Suspension Assembly Bracket). The other entry lists its application as Haohan J7G, J7B; Howo T5G. Keep the two applications separate until a substitution is specifically confirmed. The recorded position for the requested item is Front-left side of the cab; mounting point for the front suspension tilting mechanism; the comparison entry states Frontmost end of the right frame side member. In 712W41300-0000 fitment, these are identification clues for a supplier question, not proof of interchangeability. Ask the supplier to mark the offered item on the reference photograph and return the full confirmed code.

A suspension bracket, a combination support and a frame-head bracket can refer to different assemblies. Ask which mounts, bushes and fasteners are part of the quotation. Confirm the specified cab and chassis version, particularly when a lightweight chassis is mentioned. A material substitution changes more than shipping weight and requires an approved engineering specification.

Compare catalogue references before a substitution

In 712W41300-0000 fitment, the comparison provides a structured supplier question rather than a substitute list. Similar names and nearby codes can describe different working interfaces. Keep a proposed alternative under its own identity until the applicable vehicle configuration and installation requirements have been confirmed.

Build a useful photograph set

A useful image set shows the complete component, both working faces and the mounting features that distinguish it. Keep the part in a consistent orientation and place a readable scale near the feature being discussed. Add an installed overview when position is uncertain. Avoid using an edited or cropped image that removes the very boss or mounting tab the supplier needs to see. The photograph records visible geometry; hidden specifications still need written confirmation.

Use the frame side-member contact face as an item-specific discussion point for 712W41300-0000 fitment; document its relationship to the vehicle mounting reference.

Define the measuring references

Choose reference faces that another person can locate consistently. Mark them on a sketch before recording hole positions or offsets. Keep the unit of measurement explicit and avoid mixing overall dimensions with working dimensions. If two people measure from opposite faces, their results can disagree even when neither measurement is careless. A repeatable reference system makes that difference visible and helps the supplier answer the actual geometry question.

For 712W41300-0000 fitment, agree the supply scope of this front frame or suspension bracket: bare component, associated supports and any included hardware.

Describe coating requirements clearly

Separate the visual finish from a specified corrosion-protection requirement. A black surface may reflect paint or another process; its appearance alone does not establish process details or durability. If a coating is important to the application, state the agreed requirement and the evidence used to verify it. Record damaged working areas before repair. Do not invent a service-life or salt-spray claim from a product photograph.

Compare the visible working features of Front-Left Suspension Bracket Assembly with the accepted reference during 712W41300-0000 fitment. Resolve any image or delivered-item discrepancy.

Review the complete repair set

Ask the workshop which adjacent components and consumables the repair requires. A single bracket may be the main purchasing item while the job also needs bushes, hardware or an associated panel. Keep these separate in the order so omissions are visible. Confirm whether existing items may be reused under the service procedure. Preparing the complete set reduces avoidable delays after the identified replacement arrives.

Close 712W41300-0000 fitment only when the code 712W41300-0000, confirmed configuration and responsible decision are recorded together.

Request the confirmed part and supply scope

For 712W41300-0000 fitment, send Leiying the complete code 712W41300-0000, vehicle details, installed-location photographs and required quantity. Ask the team to confirm the offered component, included accessories and current supply conditions. Use custom bracket solutions for the relevant service context, or browse Frame Head Brackets catalogue references.

For general background on documented joints and fasteners, see the NASA Fastener Design Manual. Use vehicle-specific instructions for the actual truck assembly.

Frequently asked questions